NDT TRAINING INSTITUTE
- MAGNETIC PARTICLE TESTING (MT)
- ULTRASONIC TESTING (UT)
- PHASED ARRAY ULTRASONIC TESTING
- PENETRANT TESTING (PT)
- TIME OF FLIGHT DIFFRACTION ULTRASONIC TESTING
- BASIC RADIATION SAFETY
- RADIOGRAPHIC FILM INTERPRETATION (WELDS)
MAGNETIC PARTICLE TESTING (MT)
Principles of magnetism; magnetic fields; induction; permeability and reluctance; magnetisation; lines of force, methods of testing, viewing conditions, detecting media; interpretation and evaluation, acceptance levels; demagnetisation; practical exercises; methods of assessing sensitivity, reporting; instruction writing.
Course Duration : 5 days
Course Objectives:
Course Content
Course Duration : 12 days
Course Objectives:
Entry Requirements (For Examination)
Course Content
Course Duration : 12 days
Course Objectives:
Certification / Awarding Body
Entry Requirements (For Examination)
Course Content
Course Duration : 5 days
Course Objectives:
Entry Requirements (For Examination)
- To explain the basic principles of magnetic particle inspection methods
- To carry out magnetic particle inspection
- To write clear and concise inspection instructions and test reports
- To meet syllabus requirements for PCN Level 2
Certification / Awarding Body
Entry Requirements (For Examination)
The minimum requried duration of training, which includes both theoretical and practical elements, is : Level 2 - 40 hours
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 4 Months
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 4 Months
ULTRASONIC TESTING (UT)
Basic principles of sound; generation and detection of sound; behaviour of sound in a material, factors affecting propagation of sound; the flaw detector, calibration blocks/DAC blocks; use of angled beam probes for weld scanning, calibration of equipments; welding processes and weld defects; practical exercises on test specimens containing simulated flaws; examination of parent plate, butt welds, interpretation and evaluation; instruction writing.
- To explain the theoretical background of the techniques
- To calibrate ultrasonic equipment
- To measure the thickness of steel plates and determine levels of attenuation
- To locate and evaluate laminations
- To select the correct type of probe to examine welded butt joints in steel plate/pipes
- To report on the location and size of defects in typical welded butt joints
- To interpret code requirements
- To meet the syllabus requirements for PCN Level 2.
Certification / Awarding Body
The minimum required duration of training, which includes both theoretical and practical elements, is: : Level 2 - 120 hours
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 12 Months
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 12 Months
PHASED ARRAY ULTRASONIC TESTING (PAUT) OF WELDS
Introduction in PAUT, Basic Principals of PAUT, Basic components of PAUT, PAUT Probe Characteristics, Types of PAUT Probes, Beam Shaping & Steering Dynamic Depth Forms, Digitization Principles, Types of Scans, PAUT machine familiarization, Development of Scan Plan, Data acquisition, Data Interpretation etc.
- To explain the theoretical background of the techniques
- To explain the theoretical background of the techniques & the PAUT machine characteristics
- To calibrate PAUT equipment (velocity, Wedge delay, Sensivity, Encoder)
- To Scan the plates and acquire the data
- To locate and evaluate defects using PAUT
- To select the correct type of probe/ machine parameters to examine welded butt joints in steel plate
- To report on the location and size of defects in typical welded butt joints
- To interpret code requirements
- To meet the syllabus requirements for PCN Level 2
The minimum required duration of training, which includes both theoretical and practical elements, is: : Level 2 - 120 hours
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 12 Months
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 12 Months
PENETRANT TESTING (PT)
Materials, methods, compatibility of materials, application of materials, process of carrying out penetrant testing, viewing conditions, equipment requirement, equipment and safety aspects; practical exercises; methods of assessing sensitivity, intepretation and evaluation, reporting, instruction writing.
- To explain the basic principles of penetrant inspection methods
- To carry out penetrant inspection using solvent-removable, water-washable and post-emulsifiable/removal processes
- To write clear and concise inspection instructions and test reports
- To meet syllabus requirements for PCN Level 2
Certification / Awarding Body
- The minimum required duration of training, which includes both theoretical and practical elements, is: : Level 2 - 40 hours
- The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 4 Months